XINGYU 2W solenoid valve,Namur valve,Pulse valve

Compact double-piston gear, rack structure, accurate meshing, high efficiency, constant output torque. The aluminum cylinder block, piston and end cap are the lightest compared with the actuators of the same size and structure. The cylinder body is made of extruded aluminum alloy and treated by hard anodic oxidation. The sliding bearing made of low friction material can avoid direct contact between metals, with low friction coefficient, flexible rotation and long service life. Pneumatic actuator  and valve installation, connection size according to the international standard  ISO5211 pneumaitc actuators , DIN3337 pneumaitc actuators and VDI/VDE3845 pneumaitc actuators design, can be exchanged with ordinary pneumatic actuator.

Characteristics of 3v solenoid valve : 1. The direct moving type is normally closed and the commutation is sensitive; 2. No lubrication is required; 3. Multi-valve integration, saving installation space; 4. Equipped with manual device for installation and debugging; 5. There are many standard voltage levels available.

Solenoid valve coils are inductors. Solenoid valve coil is the conductor, one by one, the wire is insulated from each other, and the insulated pipe can be hollow, or it can contain iron core or magnetic powder core, or inductance. Can be divided into the inductance fixed and variable inductance, inductance fixed inductance coil is made up of wire a circle on a enclosure around the insulation pipe, wire insulation each other, and the insulating tube can be hollow, can also contain iron core or magnetic powder core, hereinafter referred to as inductance or coil.

Installation of  4v solenoid valve : 1. Before use, check whether the component is damaged during transportation and then install it; 2. Please pay attention to the direction of gas flow and whether it is correct when installing. The medium must be filtered through a 40um filter; 3. Please pay attention to whether the installation conditions meet the technical requirements and then install them; 4. Pay attention to the direction of gas flow during installation,P is the inlet port, A(B) is the working port, and R(S) is the exhaust port; 5. Try to avoid using in a vibrating environment, and pay attention to anti-freeze measures at low temperature; 6. When connecting to the pipe, pay attention to the winding of the stop belt should not exceed the end face of the joint, pay attention to remove the dust and iron dust in the pipe joint, and avoid impurities or foreign bodies into the valve body; 7. Please pay attention to the dustproof, and suggest that the exhau

2W Solenoid valve which is Direct acting solenoid valve , 2/2 Brass solenoid valve is most regular water solenoid valve ,As well as Air ,Oil .Size from 1/8 - 2 inch ,Thread BSP ,NPT can be choosed ,Brass and SS 304 / SS316 body and NBR ,EPDM ,VITON seal are available.Two - position 2/2 Solenoid valve, a direct - acting and pilot - type mechanical principle.

Namur valve is a new type of valve, the valve is mainly the result of the all the devices may be lit with explosive gas mixture components enclosed in a shell, the shell can withstand any shell joint surface or structure clearance, infiltrate into the inside of the shell of combustible mixture in the internal explosion damaged, and not caused by outside a gas or vapor formation of explosive environment, a variety of light, the temperature may produce a spark, arc and dangerous parts are in the explosion-proof enclosure, explosion-proof enclosure equipment internal space and the surrounding environment.