XINGYU 2W solenoid valve,Namur valve,Pulse valve

1. Regularly clean the dirt on the inside and outside of the high-temperature  steam iron valve  and the cladding surface, and take care not to damage the sealing surface. 2. After the installation of the high-temperature  steam iron valve , the medium should be put into the valve several times, and the valve can only be put into formal use after confirmation of normal operation. 3. If the sealing between piston and seat is not good for a long time, the sealing face of piston can be re-ground and the seat can be re-ground. 4. If the high-temperature  steam iron valve  is not used for a long time, manual valve should be closed before the valve is re-opened. When re-opened, the steam solenoid valve should remove the condensate water and make several test actions. 5. When the high-temperature  steam iron valve  is unloaded from the pipe, wipe the interior and parts and blow the storage with compressed air. 6. It is recommended that the user uni...

The Bevel valve can dissipate energy by the friction between water and air and the vortex in the water after it enters the water. When several conical valves are arranged in parallel, the distance between the axes should not be too small (for example, not less than 5 times the diameter of the valve shell D), otherwise the flow will collide with each other, resulting in a reflected flow. If the flow falls into the valve chamber, it will be difficult to operate. After improving the cone Angle of 50 °, and compared with 90 ° taper Angle valve, can make the distance between valve and valve for D (2.75 ~ 3.0), water tongue area is by two-thirds.